A simulation study of reduction kinetics for sponge iron production in a rotary hearth furnace

ABSTRACT

A mathematical model has been developed by coupling genetic algorithm (GA) with heat and material balance equations to estimate rate parameters and solid-phase evolution related to the reduction of iron ore-coal composite pellets in a multi-layer bed Rotary hearth Furnace (RHF). The present process involves treating iron ore-coal composite pellets in a crucible over the hearth in RHF. The various solid phases evolved at the end of the process are estimated experimentally, and are used in conjunction with the model to estimate rate parameters. The predicted apparent activation energy for the wustite reduction step is found to be lower than those of the reduction of higher oxides. The thermal efficiency is found to decrease significantly with an increase in the carbon content of the pellet. Thermal efficiency was also found to increase mildly up to three layers. Multilayer bed remains as a potential design parameter to increase thermal efficiency.     

TRIZ理论在集装箱吊具旋锁机构中的设计应用

利用TRIZ理论,采用因果分析现有结构中缺陷与不足产生的原因。在分析了整个集装箱吊具旋锁机构的系统组件模型后,利用因果分析寻找产生的原因。针对不同的问题采用不同的TRIZ解题工具分别运用技术矛盾、物质—场分析、进化分析对旋锁机构进行创新方案的设计。     

New rotary valves for pulse-tube refrigerators

In most used rotary valves in GM-type pulse-tube refrigerators the rotor makes heavy mechanical contact with the stator, so the valve is liable to wear, and large torques are needed. In this paper we will describe two types of valves, which have balanced forces on the rotor. In the first valve the rotor and the stator make no mechanical contact. The second type is a contact valve, like the classical valves, but the forces on the rotor are balanced in a different way. Therefore, these valves are less liable to wear, and the torques needed to rotate the valves are small.     

高温对冶金窑窑体的影响

针对冶金回转窑窑体在高温下产生的失效进行数值分析，并在此基础上对冶金窑窑体的设计方法进行修正。     

MICROSTRUCTURE AND FATIGUE PROPERTIES OF A WELDED DUPLEX STAINLESS STEEL

Abstract— In response to the increasing structural applications in duplex steels for welded structures, fatigue behaviour of a SAF 2304 grade duplex stainless steel was investigated, considering both the base metal and GTAW welded joints. Fatigue curves and fatigue limits under rotary bending fatigue were obtained. The study focused attention on the microstructural features of fatigue crack propagation of the two series of experiments, thereby permitting an evaluation of the tortuous crack path of welded joints and the mechanisms related to threshold microstructural barriers.     

钼顶头破坏行为及强韧化分析

通过对钼顶头破坏行为的分析，说明了钼顶头破坏的主要原因。并进一步通过对钼顶头强韧化的分析，阐述了钼顶头延长使用寿命的措施，并制定了钼顶头生产工艺。     

转子-轴承系统启动过程瞬态不平衡响应的有限元分析

转子系统在启动的瞬态过程中通过共振区时常常会产生很大的振动。利用有限元法对多自由度的某转子-轴承系统的，临界转速和启动过程的瞬态不平衡响应进行了分析，研究了该系统的瞬态振动特性，讨论了启动加速度对转子系统振动的影响。计算结果为降低旋转机械系统启动过程的振动影响提供了一定的理论参考。     

VILOFT织物的染整工艺

新型VILOFT粘胶纤维织物具有独特的扁平截面，导湿透气，蓬松保暖。本文探讨该纤维织物的前处理，染色，整理工艺，优化并给出了具体工艺参数，对实际生产有一定的参考价值。     

穿甲威力试验方法的改进

引入单发临界穿透速度的概念，２数字仿真技术模拟穿甲威力试验结果，对出的试验结果进行分析，通过分析发现目前试验方法中的缺陷。并提出了改进的试验方法，与目前试验方法比较，改进的方法有很大的优越性。     

Design improvements on rotary valve particle feeders used for obtaining suspended airflows

The back repulsion of low density particles, sticking of particles in feeder valve and interlocking and cohesive archs of particles in feeder hopper have been widely observed problems of a conventional rotary valve feeder used for feeding of granular particles into an airflow line. In this study, these problems of the rotary valve feeders were isolated by means of novel modifications to its conventional design. Results of the modifications showed that the modified feeder can be sensitively used to feed granular particles with mass feeding rates ranging between 5±0.15 and 85±0.85 g/s without encountering problems experienced with conventional rotary valves.